Dragons protective scales

Dragons protective scales

Protects you

“By the dragons light, on this (month) night, I call to thee to give me your might, by the power of three, I conjure thee, to protect all that, surrounds me, so mote it be, so mote it be!!!

Drive away Evil

Drive away Evil

A charm to drive away evil

The following ingredients are needed:

Iron Nail (rusted)
small flat stone
Hammer

Set the nail on the stone and with the hammer strike it 3 times at each stroke say thus;

Clavus Ferreus Malleus Ferreus Ferrum rufulum Ferrum Nobilis

Score the stone thrice across with the nail’s point, then take the stone away and quickly bury it in the earth far from your house. The nail should afterwards be carried with you as a charm agains evil.

Element Balance

Element Balance

Keeps the Elements in sync with you!!!

Warning!! This spell can Backfire! this happened to my Friend but it is VERY RARE!

All the ingredients must be placed in the 4 corners of the container!!!!

The following ingredients are needed:

1 stick of Cinnamon
2 Teaspoons on Water
3 handfuls of Earth (Mud from your back yard!)
4 paper fans(Made from plain A4)
Box of matches
Container
Your focus and Determination

Take your container and add the Cinnamon and imagine Fire Add the Water and think of a flow of a river Sprinkle in the Earth and imagine the whole of the Planet Add the Fans and think of the most destructive of Hurricanes/Tornadoes/Monsoons Then light the Matches and place them with the flame pointing out away from the element(the water will put the match out so don’t place that in!!!!) put a lid on the container and return to it in 4 weeks then bury it. After about 24 hrs you will feel more relaxed an comforted as the element will flow through you!!!!!

Mountain Armor

Mountain Armor

this will help reduce pain as a sheild when someone is about to hit you

Plant yourself firmly on the ground. Imagine yourself as a mountain strong and powerful. Now take your magical energy and merge yourself with the ground. Stand firm and think you have a mountain surrounding you.

PSYCHIC PROTECTION SPELL

PSYCHIC PROTECTION SPELL

It is best to find a work area that you can leave untouched for 3 days.

The following ingredients are needed:

Love or protection incense

PSYCHIC PROTECTION SPELL

 

It is best to find a work area that you can leave untouched for 3 days. If you must put away your tools, try to leave the spell candle out in the open. Prepare your work area by setting up any tools you may be using in addition to your spells candle. (Black) Love or protection incense is recommended. While setting up your area, concentrate on the purpose of the work. Bathe or cleanse your self. Do not let negative thought enter your mind. Go your work area. Cast the Circle, light incense. Envision a large, white ball of light surrounding you, your work area, and your home. Hold the candle between the palms of your hand and direct all positive energy into it. Place the candle and prior to lighting say, “This candle represents protection over me in all things.” Light the candle and say, “As the light of this flame grows, I feel the light and positive energy around me. As this candle burns, everything around me is blessed with light and love. I am blessed with light and love. Negative energy is banished.” Sit back and watch the candle burn. Keep visualizing the white ball of light and protection around you.. Evision your higher self blessing you and protecting you from harm. When the candle has burned 1/3 of the way down say, “As the flame of the candle is extinguished… Evil, negativity, and harm towards me is banished! Any entity, ghost or spirit her by mistake go into the light and pass on to the world of spirit, be not afraid as many wait for you there who you have loved and who love you. Extinguish the candle. But don’t blow it out! Repeat this for 2 more nights. Bury or throw away the left over wax. -Belza-

PSYCHIC SHIELD

PSYCHIC SHIELD

 

TO STRENGTHEN YOUR PSYCHIC SHIELD

The following ingredients are needed
red candle
black candle
white candle
elder blossoms
marjoram
mint
rue
clove
frankincense
jasmine
lavender

The night before the Full Moon, find a place where your altar will not be disturbed for 24 hours. Put the cauldron in the center with a red candle on the right side, black candle of the left side, and white candle in the back; but do not light them yet. Sprinkle a mixture of equal parts of elder blossoms, marjoram, mint and rue in an unbroken circle around the cauldron. Into a tiny vial, measure equal drops of clove, frankincense, jasmine, and lavender. Set the sealed bottle in the cauldron and leave until the night of the Full Moon. On Full Moon night, take a cleansing bathe and robe yourself in white. Carry a good protective or purification incense through every room in the house. Make certain that the smoke drifts into closets. Return to the altar and light the candles. Take up the dagger or sword. Face the East and raise the sword in salute. To salute in this manner, simply hold the sword point upward in front of you. Say: By the power of the rising sun, all evil in my life is done. Turn to the South, salute, say: By the power of darkening night, my shield is strong, my armor tight. Turn to the North, salute, say: By Full Moon in blackening sky, I am not alone. My help is nigh. The Goddess’s hands around me stay, To keep me safe by night and day. Begone, foul spirits, unbidden here. I send you back, I do not fear. For I have won. I am set free. You have no further power over me. Face the altar and take up the vial of oil. Put a drop of oil on your finger and anoint your forehead, heart, solar plexus, wrists and ankles. As you do this, visualize a shining blue suit of armor slowly descending over your body until you are entirely protected. Cap the bottle and store in a safe place. Thank the Powers for their help and extinguish the candles. Apply the oil and repeat the chants whenever you feel the armor is slipping.

PUPPETS

PUPPETS

A puppet is a doll. It is the shape of a human that is used for magical purposes. They are used in spells to help either you or someone else. These dolls can be made from wood, cloth, clay, paper, or fabric.

To make a fabric puppet cut a human outline from two pieces of fabric with their right sides together. It does not need to be detailed. You can keep the hands and feet rounded. If the puppet is to represent you, use a piece of fabric from some of your old clothes. Sew most of the figure with right sides together. Leave a small area unsewn. Turn it right side out and stuff. You may stuff the figure with batting, tissue, straw, paper, or whatever is handy. You may add herbs, a lock of hair or other personal effect. Sew the hole. You may add button eyes and decorate to personalize. Do not make puppets of other people unless you have permission. Do not destroy the puppet. If it represents another person, give it to that person to keep it safe. If it was made for binding, bury it.

Pheonix Power Unbound

Pheonix Power Unbound

To give your self the power of the pheonix.This will last for 5 moons (5 days).

The following ingredients are needed

Your staff or what ever you use.
5 red or black unused candles

Draw a pentagram on the ground. Place the candles at each point.Stand in the middle and hold up your tool.Now chant the folowing 3 times.When done blow out one candle for each day that passes.

Black flame,
Pheonix claim,
Spirits around,
Give me power unbound.

Powerful Protection Spell

Powerful Protection Spell

Protect your loved ones. This spell can HELP protect yourself, too.

The following ingredients are needed
Voice or ability to hear your voice in your head.
Candles (Optional)

If you are using candles, place them in a circle around you and recite the following spell. If you are in public, say this in your head.

Protect my family, protect my friends, Protect us all until the end.

This spell should be said as many times as possible.

Powerful banishing spell

Powerful banishing spell

Banishing all is the purpose of this spell.

The following ingredients are needed
1 red candle
1 bue candle
1 teaspoon of your favorite herb
1 photo of the person/people your working on
1 piece of orange skin

Lighting your candles,you need to hold the photo of the people your working with over the blue one and the orange peel over the red one.as soon ads the photo catches recite the words:thou who has done badly to my friend I hate you are now burning all from fate.thy has hurt [insert name here] shall be hurting [insert name here] from the pain of which you have caused.the orange peel should have burned and so the pain will start.

 

Protection from elements

Protection from elements

A handy spell to help protect yourself against the weather

At any time, chant;

So that I may not get ill or into trouble; cover me over with a protective bubble.

(Note: ‘ill’ can be replaced with ‘hurt’ for other forms of protection.)

Making Incense – Incense Papers

Incense Papers

Incense papers are a delightful variation of combustible incense. Here, rather than using charcoal and gum tragacanth, tinctures and paper are the basic ingredients. To make incense papers, take a piece of white blotter paper and cut it into six-inch strips about an inch wide. Next, add 1 1/2 teaspoons potassium nitrate to 1/2 cup very warm water. Stir until potassium nitrate is completely dissolved. Soak the paper strips in the nitrate solution until thoroughly saturated. Hang them to dry.
You now have the paper versions of the charcoal blocks used to burn incense. The obstacle in scenting them is to overcome the normal smell of burning of burning paper. For this reason, heavy fragrances should be used, such as tinctures. Tinctures compounded from gums and resins seem to produce the best results. Empower the tincture(s) with you Magickal need, then pour a few drops of the tincture onto one strip of paper. Smear this over the paper and add more drops until it is completely coated on one side. Hang the strip up to dry and store in labeled, airtight container until needed.

To speed drying, turn on the oven to a low temperature, leave the door open, and place the soaked incense papers on the rack. Remove them when dry. Generally speaking, incense papers should be made with one tincture rather than mixtures. To use incense papers, simply remove one paper and hold it above your censer. Light one tip with a match, and after it is completely involved in flame, quickly blow it out. Place the glowing paper in your censer and let it smolder, visualizing or working your Magickal ritual. Incense papers should burn slowly and emit a pleasant scent.
Plain unscented papers can be used in place of charcoal blocks. For this purpose soak the papers in the potassium nitrate solution and let dry, then set one alight in the censer. Sprinkle a thin layer of the incense over the paper. As it burns the paper will also smolder your incense. You may have difficulty in keeping incense paper lit. The secret here is to allow air to circulate below the papers. You can ensure this by either placing the paper on some heat-proof object in the censer, or by filling the censer with salt or sand and thrusting one end of the paper into this, much as you might with incense sticks. The paper should burn all the way to its end.

Incense Making – Stick Incense

Stick Incense

Add more trag glue to the mixed incense and base until the mixture is wet but still rather thick. The trick here is in determining the proper thickness of the incense/trag mixture and in finding appropriate materials to use. Try homemade wooden or bamboo splints, broom straws, very thin twigs, or those long wooden cocktail skewers. Dip the sticks into the mixture, let them sit upright and then dip again. Several dippings are usually necessary; this is a most difficult process.

When the sticks have accumulated a sufficient amount of the incense, poke them into a slab of clay or some other substance so that they stand upright. Allow them to dry. One variation on stick incense making uses a stiffer incense dough. Pat down the dough on waxed paper until it is very thin. Place the stick on the dough. Roll a thin coating of dough around the stick. The incense shouldn’t be more than twice the thickness of the stick. Squeeze or press it onto the stick so that it will stay put, and let dry.

Incense Making – The Two Forms of Incense

The Two Forms of Incense

Two types of incense are used in Magic: the combustible and the noncombustible. The former contains potassium nitrate (saltpeter) to aid in burning, while the latter does not. Therefore combustible incense can be burned in the form of bricks, cones, sticks and other shapes, whereas noncumbustible incense must be sprinkled onto glowing charcoal blocks to release its fragrance.

Noncombustible Incense

Be sure you have all necessary ingredients. If you lack any, decide on substitutions. Each ingredient must be finely ground, preferably to a powder, using either a mortar and pestle or an electric grinder. Some resins won’t powder easily, but with practice you’ll find the right touch. When all is ready, fix your mind on the incense’s goal. In a large wooden or ceramic bowl, mix the resins and gums together with your hands. While mingling these fragrant substances, also mix their energies. Visualize your personal power–vibrating with your Magickal goal–exiting your hands and entering the incense.
Next, mix in all the powdered leaves, barks, flowers and roots. As you mix, continue to visualize or concentrate on the incense’s goal. Now add any oils or liquids that are included in the recipe. Just a few drops are usually sufficient. Once all has been thoroughly mixed, add any powdered stones or other power boosters. The incense is now fully compounded. Empower the incense and it is done. Store in a tightly capped jar. Label carefully, including the name of the incense and date of composition. It is ready for use when needed.

Combustible Incense

Combustible incense (in the form of cones, blocks, and sticks) is fairly complex in its composition, but many feel the results are worth the extra work. Gum tragacanth glue or mucilage is the basic ingredient of all molded incenses. Gum tragacanth is available at some herb stores. It is rather expensive, but a little will last for months. To make tragacanth glue, place a teaspoon of the ground herb in a glass of warm water. Mix thoroughly until all particles are dispersed. To facilitate this, place in a bowl and whisk or beat with an egg beater. This will cause foam to rise, but it can be easily skimmed off or allowed to disperse. The gum tragacanth has enormous absorption qualities; an ounce will absorb up to one gallon of water in a week.

Let the tragacanth absorb the water until it becomes a thick, bitter-smelling paste. The consistency of the mixture depends on the form of incense desired. For sticks (the most difficult kind to make), the mixture should be relatively thin. For blocks and cones a thicker mucilage should be made. This where practice comes in handy; after a session or two you will automatically know when the mucilage is at the correct consistency.

If you can’t find tragacanth, try using gum arabic in its place. This, too, absorbs water. When you have made the trag glue, cover with a wet cloth and set aside. It will continue to thicken as it sits, so if it becomes too thick add a bit of water and stir thoroughly.

Next, make up the incense base:
Cone Incense Base 6 parts ground Charcoal (not self-igniting), 1 part ground Benzoin, 2 parts ground Sandalwood, 1 part ground Orris root (this “fixes” the scent), 6 drops essential oil (use the oil form of one of the ingredients in the incense), 2 to 4 parts mixed, empowered incense.
Mix the first four ingredients until all are well blended. Add the drops of essential oil and mix again with you hands. The goal is to create a powdered mixture with a fine texture. If you wish, run the mixture through a grinder or mortar again until it is satisfactory. Add 2 to 4 parts of the completed and empowered incense mixture. Combine this well with your hands.
Then using a small kitchen scale, weigh the completed incense and add ten percent potassium nitrate. If you’ve made ten ounces of incense, add one ounce potassium nitrate. Mix this until the white powder is thoroughly blended. Next, add the trag glue. Do this a teaspoon at a time, mixing with your hands in a large bowl until all ingredients are wetted.

For cone incense you’ll need a very stiff, dough-like texture. If it is too thick it won’t properly form into cones and will take forever to dry. The mixture should mold easily and hold its shape. On a piece of waxed paper, shape the mixture into basic cone shapes, exactly like the ones you’ve probably bought. If this form isn’t used, the incense might not burn properly. When you’ve made up your cone incense, let it dry for two to seven days in a warm place. Your incense is finished.

The Making of Incense – The Materials

The Making of Incense
The Materials

Incenses are composed of a variety of leaves, flowers, roots, barks, woods, resins, gums and oils. Semiprecious stones may also be added to incenses to lend their energies to the mixture. Out of the literally hundreds of potential incense ingredients, perhaps 14 are most frequently used. Keep a stock of these herbs on hand if you plan to make several incense. These might include:
Frankincense, Myrrh, Benzoin, Copal, Rose petals, Bay, Cinnamon, Pine needles or resin(pitch) Juniper Sandalwood Cedar Thyme Basil Rosemary
Be aware that many plants (if not all) smell quite different when being smoldered. Sweet scents turn sour fast.