CRYSTAL WANDS

Crystal Wands are one of the most powerful forms of ‘light tools’ presently known to mankind.

The wand itself consists of a hollow copper tube of about one foot in length. The copper tube should be around three-quarters of an inch in diameter.

A quartz crystal of at least three inches in length and around three-quarter of an inch wide, clear and with reasonably unchipped facets, should be affixed to one end of the copper tube. At the other end of the copper tube is either a copper cap or another quartz crystal.

Either single – or double terminated quartz crystals may be used. The whole copper tube is insulated by a leather strip wound completely around the wand.

The very best way to discover exactly how a crystal wand functions – and its tremendous potentialities as an ‘energizer’ – is to make one for yourself. By
constructing your very own crystal wand you will soon find that it then becomes much easier to merge your own vibrations with that of your wand………

To make your own personal crystal wand first take your hollow copper tube and, with a hacksaw, cut two lengthwise strips at one end of the tube, about three inches deep. Then, with a pair of pliers, bend the sides outwards so as to allow your quartz crystal to slide into place.

Before doing so, however, you must glue the sides of your quartz crystal and then gently slide the crystal into its place within the copper tube. You must now bend the sides back into place and ensure that at least one inch of your crystal protrudes at the end.

At the other end of the copper tube, either glue the copper cap into position or affix another quartz crystal.

Finally, take your leather strip (any color will do) which needs to be about three feet in length and place a small amount of glue at intervals along one side. Then tightly wrap the leather, in spiral fashion, around the copper
tubing. Your crystal wand is now ready to be used!

When your crystal wand is lying by itself without you holding it, it is in what I would describe as the ‘passive’ mode but as soon as you pick up your crystal wand it becomes operational and is in an ‘active’ mode.

Crystal wands are extremely simple to operate. All that you need to do is to pick up your wand, focus the crystalline energy by visualizing a blue/white
light of energy radiating from the apex of the quartz crystal in your wand, and you have now created your own powerful ray of energy and power.

You must, however, be very sure that you use your new ‘tool’ and crystal friend very wisely!

At my very first crystal healing workshop, when I had only just constructed my very first crystal wand, I was holding my wand in my right hand whilst I was
talking and, without thinking, I must have directed the wand at the third eye chakra of one of the students present.

With a ‘yell’ the student nearly toppled back on his chair. Apparently he had experienced a tremendous burst of energy and power emanating from my wand which
had almost thrown him back into his seat!

It is therefore very important that you are extremely careful where you point your crystal wand when you are holding it.

For ordinary crystal healing purposes I use my wand in much the same way as if I were using a normal quartz crystal. I take my wand in my right hand and I move
the wand around the perimeter of the patient’s body, in a clock-wise direction – for a few moments.

I then focus the crystalline energies of my wand through the apex of the quartz crystal and direct these energies into the body of the person whom I am treating. I find that about fifteen minutes is sufficient at any one treatment session.

After directing the crystal healing energy into the patient I finish the treatment session by once again moving the wand around the perimeter of the patient’s body, again in a clock-wise direction, for a few moments.

Using this technique the patient’s body becomes surrounded by a ‘sea’ of crystalline energy and this energy penetrates every fiber of the patient’s inner and outer being; and, in most cases, deep, lasting, healing occurs.

As soon as I pick up my crystal wand I can feel the whole wand begin to vibrate and pulsate. My hands start to tingle and I feel alive with crystalline energy and power. I channel my own healing energies into the wand which then becomes even more powerful and thus by the time the healing rays are projected through the quartz crystal at the end of the wand I can sense that I have managed to create a wonderful source of power and energy.

I am often asked at my workshops and seminars why it is necessary to insulate the wand with leather. Insulation is essential for your own personal protection as I have found out myself from painful experience.

When you are working with your crystal wand for any length of time a great many subatomic particles accumulate within the copper tube and, on occasions, if you were to touch the actual copper you may receive an electrical type shock. This has happened to me on more than one occasion in my experimental work. So be
warned!

The results that you are able to obtain by using a crystal wand depend very much upon your own ability in being able to attune yourself at a high enough level with all the vibrational energies at your disposal. Like everything else in our earthly life, the more you practice, the more you achieve!

As your energies become stronger, your wand will grow more potent too! Crystal wands never ever breakdown, never need an external power source (eg batteries or
electricity) and may be used twenty-four hours a day, seven days a week.

The possibilities are unlimited. Experiment with your crystal wand. Stretch your imagination and inventiveness beyond their normal range. Allow yourself to become at one with your crystal wand. Establish a complete rapport and empathy with it.

Crystal wands may, from time to time, be used for purposes other than for healing. For example, one evening I had to give a talk at a town some 50 miles
from where I live. I was running late!! I had been unavoidably delayed and I knew that time was short. I came off the motorway and found myself engulfed in
traffic being delayed by a continuous stream of red traffic lights.

By a strange coincidence my crystal wand was lying on the front passenger seat next to me. Without really thinking about what I was doing I idly picked the wand up with my left hand and focused it on the next red traffic light that I came across. It turned to green immediately!

And so it went on. Every red traffic light, virtually instantaneously, turned to green as soon as I directed the crystal wand in its direction. I thus managed to
arrive at my meeting dead on time. Strange, but true!

Why not construct your very own crystal wand now – and discover for yourself all that it can do?