Create Your Own Magical Tools
Author: Beverly Hill
Practitioners of magic know the value of having a finely crafted magical tool for spell work. Learn how to create your own magical stave or wand.
The decision to create a wand or stave should not be made impulsively. Each magical tool must have a clear purpose behind its creation. A wand, for instance, is a focusing tool for drawing in and directing magical energy. A stave’s purpose could be similar, or it might consist of a more protective nature used for radiating protective energies around it’s wielder. Whatever the purpose, the magical tool should be constructed in a respectful manner.
Selecting Wood For Crafting Magical Tools
The choice to use live or dead wood is a hotly debated topic amongst many practitioners of magic. Some would say that you should never use live wood, while others would contend that dead wood lacks any energy to lend toward a magical working. Ultimately the decision to use live or dead wood will lie with the tool wielder’s own beliefs and personal path.
When selecting a wood for creating a wand or stave, take time to review the magical properties of wood species and select one that will be consistent with the type of magic the wand will be used for. The lunar phase should also be noted. Most new projects should be begun on a new moon and culminate by the full moon.
If collecting from a live tree, ask the tree for permission before making any cuts. Take only enough of the tree to create the desired tool, being careful not to cause any additional damage or trauma to the tree. It is customary to leave a small token or offering in appreciation of the sacrifice.
Creating a Magical Wand or Stave
A good goal for a wand is to have a relatively straight piece of wood that measures from wrist to elbow, and then adjust the size downward from there. Using a piece of fine grain sandpaper, sand off any rough areas along the wood. It is not necessary to remove the bark from the wand, but it may be done if desired.
Once sanded, wipe down the wood with a good mineral or wood oil and then set aside. Each time the wood begins to dry, oil it again and set it aside. It could take several days for the wood to dry from repeated oiling before it finally stops soaking it in. The oiling process helps preserve the wood and keep it from drying out and becoming brittle.
A stave length should be no higher than head height, and may be shortened to whatever feels most comfortable for the practitioner. The stave should be sanded and oiled just as with the wand construction. When the stave or wand is sufficiently dry to the touch, finishing touches may be added such as the carving of runes and symbols, or the mounting of stones.
To seat a crystal into the tip of the wand, choose a crystal that is slightly smaller in diameter than the wood. Carefully bore out a small hole and fill it with gem glue. Insert the largest end of the crystal into the hole and tape it securely until dry. After the glue is dry, remove the tape. From this point wire wrap can be used to better secure the crystal to the wand if desired, or it can be left plain.
During all steps of construction, keep in mind the purpose for constructing a magical tool. Once the wand or stave construction is finished, it can be formally dedicated if the practitioner so desires. Wipe the wood with a fresh bit of oil every few months to help preserve it, and it will last for years to come.